WYNNsky Shop Air Line Kit, 3/8 Inch (9.5MM) OD × 60 Feet Nylon Compressed Air Pipe, 200PSI, Cutter, Tees, Mounting clips, Connectors, 49PCS Garage Air Compressor Accessories Master Kit
Brand | WYNNsky |
Material | nylon plastic steel |
Color | Blue/Red |
Product Dimensions | 720"L x 0.37"W |
Inside Diameter | 0.38 Inches |
Item Weight | 16 ounces |
Maximum Pressure | 800 Pound per Square Inch |
Nominal Wall Thickness | 0.035 inches |
Outside Diameter | 0.38 Inches |
Item Length | 6E+1 Feet |
Manufacturer | WYNNsky |
Part Number | TH1043S |
Item Weight | 1 pounds |
Item model number | TH1043S |
Number Of Pieces | 49 |
Batteries Included? | No |
Batteries Required? | No |
M**E
Don't expect it to work out of the Box!!
First of all the tubing is not very flexible making it very hard to get the tubing to lay flat. I used a heat gun to get it flexible and was able to get it mostly flat.Almost all of the connections leaked like crazy.....as some of the other reviews indicated.To remedy this I again used the heat gun on the tubing ends for about a min to min 1/2 just before inserting it into the connector, this seemed to solve the issue of all the leaking. I did this on every one of the 6 connections. Given the amount of work needed to get this to work I would not recommend this. Just noticed it is no longer available anyways but just in case, Please look for other options!!
J**A
Comprehensive content in the kit but poor quality
I spent the morning installing in my garage, ended up with a couple of leaks in several fittings, I'm not confident in the durability but we shall see. The fittings must create considerable restriction as outlet air velocity is noticeably less than using my coiled air hose. I am disappointed. It's a slick looking system but thats about it. I'd like to return it but too much work now. Any problems and I will switch to copper pipe.
J**S
Junk
Bought this a little while ago. Just finally got to install it. What a waste of time. Everything leaks. No way to fix it. No way to install proper I tried warming up pipe I tried different angles. I wouldn't even waste time looking at this. Tossed it all in garbage. Clips break. Every fitting leaks.
R**E
Hot garbage
No matter what I did I could not get the connectors to stop leaking. I followed the instructions to a T, tried new connectors and no hope. Constant leaking
D**E
Too thin
if you are planning on using these for anything more than inflating your tires than you will be disappointed. For anything useful like pneumatic tools etc. I think you will need at least a 3/4 to 1" line.
Trustpilot
2 days ago
4 days ago